Linksys has transformed the entire networking scenario by introducing various wifi range extenders for various needs and preferences. One such masterpiece is Linksys RE6300. It is a dual-band signal repeater that comes with various advanced features. So if you also bought one for extending the wireless coverage of your router then to fetch all the benefits you must know about the Linksys RE6300 setup process. In this particular post we’ll guide you with the same. The post will cover RE6300 features, setup requirements and two different setup methods. With no further delay let’s check out each point one after the other.

Highlights Of Linksys RE6300 Setup

Linksys RE6300 wifi range extender operates on dual frequency bands. To be precise the 2.4 Ghz band emits speeds of upto 300Mbps. On the other hand with 5Ghz frequency band you get to fetch high wifi speeds of up to 433 Mbps. Moving further, this particular range extender can provide coverage to an area of 6500 square feet. Thereafter it features one Ethernet port, which enables you to link any smart device directly to the Linksys RE6300 setup. Next up, the spot finder technology offers a great advantage. Because finding the right plotting spot for the networking device is a major and time consuming task. But with the spot finder you need not put in too much effort as it will help you with the same.

Thereafter, the beamforming technology alongside cross band technology adds another layer of convenience. So overall with Linksys re6300 setup you can easily scroll, browse or stream any content without coming across any connectivity problem. Now comes the best part which is quick setup using the WPS button. With just a simple push of a button you can easily enjoy uninterrupted wifi connectivity. Now let’s jump on to the installation guide.

Installation Using WPS Button

Linksys RE6300 setup using the WPS button is so easy that it just takes around 5 to 7 minutes to finish it. The steps for it are:

First plot the Linksys device nearby to the router.
Thereafter plug it directly into the AC power socket and turn on the power button.
With this the extender will activate and will show up a stable light within a few moments.
Now you have to click the WPS button from the side panel of RE6300. The light will begin to flutter. This means the WPS function of the extender is now active.
Immediately you now need to click your router’s WPS button as well. The LED on it will also flutter.
Now all you have to do is hold on till the smart indicators stop fluttering and thus turn solid. Once this happens, you can rest easy knowing the Linksys RE6300 setup is complete.
Finally, unplug RE6300 from its current socket and replug into a socket which is halfway from the router and the area of concern. As you switch it on the devices will sync back together automatically. In case they do not, then you need to move the RE6300 a little closer to the router.

Requirements For Setup Via Internet Browser

For the WPS setup method there is one major necessity that is that your router must support the WPS button. So if you do not have the router with this functionality then the alternative Linksys RE6300 setup option is using a web browser. So here are the requirements for this particular method:

A router and its wireless details.
A smart device.
An AC power outlet
Lastly, accurate login details.

Now as you are aware about the requirements, let’s move on to the installation steps.

Setup Guidance

✓ First plug the repeater in close proximity to the router. Thereafter turn on the power. Within a few minutes the device will boot up and show a solid indicator.

✓ In this Linksys RE6300 setup step you require your smart device. It can be anything from laptop to your cellphone. Activate its wifi. From the back side of RE6300 note down wireless details. With the help of these details link your device to the RE6300 network.

✓ Moving further, open the internet browser. In its URL column load http://extender.linksys.com . Press the Enter key. Next click on the Start Setup option. As you do so the login window becomes accessible. Here, type in the password. If never changed before, then you can use the term “admin”. With this click on Login.

✓ Finally, the interface will provide you with a list of nearby networks. From this list you have to pick your router’s identity. Then type its password. Lastly click on Connect. With this the process for Linksys RE6300 setup comes to an end.

✓ Lastly, you just need to reposition the device and for this take advantage of Spot finder technology.